FutureStarr

How to Figure How Many Tiles I Need

## How to Figure How Many Tiles I Need

Your three-bedroom abode is about to undergo an extensive remodel. There are so many ways you can go about this, but what do you want to achieve? One key point is determining how many tiles you will need to assemble.

### Wall

via GIPHY

A: You’re wise to mull over your tile needs before you go shopping for materials. Whether you’re installing tile on your foyer floor or on your kitchen or bathroom walls, determining how much tile you need is an essential first step. This calculation will help you ensure adequate tile coverage, budget accordingly for the project, and avoid return trips to your local home center. Conveniently, the steps for determining your tile needs are the same regardless of surface, so grab a measuring tape and a calculator and get started!

For square or rectangular areas, such as a wall or floor, multiply the length by the width to get the area in square feet. If the dimensions aren’t a whole number (i.e., the measurement includes feet and inches), divide the number of inches by 12 to convert it to feet, add that decimal to the number of feet, and complete the rest of the calculation as described above to get the area in square feet. Always round up your total to the nearest foot when the area includes a decimal. (Source: www.bobvila.com)

### Need

via GIPHY

Floor or wall tiles are typically installed with gaps between the tiles because the average tile may look quite similar to the next tile, but they are often not uniform in shape and size, and would not fit properly if installed without any gaps. These gaps are most commonly filled with grout, and as such, are often referred to as grout size, or grout lines. Grout is a form of concrete, and the gap between tiles can range from anywhere between one-sixteenth of an inch to half an inch in size. Different sized tiles, materials, and design needs all affect the size of the gaps. Although it is typically more difficult to have small gaps between tiles due to lack of a uniform shape and size, the use of rectified tiles (tiles that undergo additional processing to ensure that they are uniform) can allow for smaller spacing, though at an additional cost. For more uniformly cut tiles such as granite, smaller grout spacing can result in less visibility of grout lines between each tile.

Calculate the overage you'll need. You should never buy just the amount of tile you need since you also need a bit extra for cuts, waste, breaks, and mistakes. Multiply the square footage of the room by 10%, then add this amount to the total square of the room. This is the total amount of square footage you should buy. To continue with the example we started above, .10 x 120 = 12, and 120 + 12 = 122. We'll need 122 square feet of tile. (Source: dengarden.com)

## Related Articles

• #### North korean kim jong un

August 10, 2022     |     Future Starr
• #### AField Plants

August 10, 2022     |     Muhammad basit
• #### What is brazil famous for

August 10, 2022     |     Future Starr
• #### Seed Stratification Methodsor

August 10, 2022     |     Muhammad basit
• #### Scutellaria Incana

August 10, 2022     |     m basit
• #### AField Pussytoes

August 10, 2022     |     Muhammad basit
• #### Ramp plant flower

August 10, 2022     |     m basit
• #### Thimbleweed Plantor

August 10, 2022     |     Muhammad basit
• #### Opuntia humifusa

August 10, 2022     |     m basit
• #### ALion Nursery

August 10, 2022     |     Muhammad basit
• #### How much water should you drink in a dayor

August 10, 2022     |     Muhammad basit
• #### Symphyotrichum Lanceolatum

August 10, 2022     |     m basit
• #### Native Plants Kansas Cityor

August 10, 2022     |     Muhammad basit
• #### Craigslist San Diego Garage Sales

August 10, 2022     |     Future Starr
• #### Craigslist PA: Local Personality Ad

August 10, 2022     |     Future Starr