Add your company website/link
to this blog page for only $40 Purchase now!Continue
FutureStarrSharpening a Chainsawor
Would you like to know about the whys and hows of sharpening your chainsaw?
A chainsaw’s nasty-looking cutters can scare you into thinking you can’t sharpen the saw yourself. But in about 10 minutes, with the help of a couple of inexpensive files and guides, you can transform your slow-cutting chainsaw into a firewood-cutting ninja. You can sharpen the chain right on the saw and right by the wood you’re cutting. Do it often, and you’ll get years of sharp cutting life from your chain. Here, we’ll show you how to use chain saw sharpeners.
If you use the same chain for a few years, then buy a new one, the new one won't mesh smoothly with the sprocket and bar. It'll cause rougher cutting and faster wear on the saw. Bob Tacke, chainsaw expert, advises: “Buy two extra chains and switch off among the three occasionally. This way all the components of the cutting train—bar, sprockets and chains—will fit together and prolong the life of your saw.” (Source: www.familyhandyman.com)
Use the tension adjusting screw to tighten the chain. Find the tension adjusting screw on your chainsaw, usually perpendicular to the direction of the chain. Use a screwdriver to tighten the chain by tightening this screw. Make sure the chain is tight, but it is still able to move around the saw with a little effort. This stops the chain from moving as you sharpen it.
Using a chainsaw makes cutting through trees or any other wood so much easier, but over time your chain will begin to dull. If using your chainsaw becomes difficult, you have to apply pressure for it to cut through anything, it might need to be sharpened. By knowing the right tools to use and the right way to use them, you can easily sharpen your chainsaw and get in back in working condition. (Source: www.wikihow.com)