FutureStarr

How to jumpstart a car

How to jumpstart a car

How to jumpstart a car

There is no such thing as walking into a car showroom and purchasing the perfect car that is right for you. You have to participate in a complicated selection process and make sure you buy the perfect car by matching your style and preferences with the car you’d like to buy.A jump start is a handy way to start a car with a flat battery. But jump leads can cause damage to both cars and people if they’re not used properly. Don’t let any metal objects touch the car batteries - these could cause a spark and possibly make the battery explode. That includes rings, necklaces, watch straps, hand tools, clips, stray wires etc.

Car

Turn off both cars’ engines and carefully disconnect the leads in the reverse order to the way they were connected (remove the black lead from your car first and finish with the red lead from the other car). On average, batteries last between 5 and 7 years but you should only consider changing a car battery when it's showing signs of deterioration. Hook the red (+) clamp to the positive terminal of the dead battery. Then, attach the red (+) clamp to the positive terminal of the working battery. Clamp the black (-) to the negative terminal of the working battery. Finally, attach the remaining black (-) to an unpainted metal surface of the dead car. Carrying a set of jumper cables can help you help a fellow motorist—or the other way around. How to jump start a car is usually pretty simple, but it’s serious business and you have to do it right to do it safely. Every year people are seriously injured while attempting to help another driver with a “jump.”

Clip this how to jump a car battery article and put it in your glove box. Then, before you even connect the cables, go through these steps for how to jump a car battery safely.Clamp the positive (red or yellow) cable to the positive terminal of the weak battery. Make sure the other end doesn’t touch any part of the car’s engine or body or you could get a dangerous spark. Make sure you can identify the positive and negative terminals of both batteries to know how to put on jumper cables. Also be sure you’ll have enough room to clamp to the cable terminals. The positive terminal is most likely connected to the car’s starting/charging system with a red cable that has a plus sign. The negative is connected to the engine of the vehicle and usually haClamp the other end of the negative cable to a clean metal part of the engine (like a bolt head or bracket) in the car with the weak battery. Keep the clamp away from the battery, any moving parts and the fuel system.(Source:www.familyhandyman.com)

Battery

Clamp the other end of the negative cable to a clean metal part of the engine (like a bolt head or bracket) in the car with the weak battery. Keep the clamp away from the battery, any moving parts and tCaution: Don’t attach the negative cable to the negative terminal of the weak battery when jumping a car battery! This common mistake could ignite hydrogen gas directly over the battery. Battery explosions can cause serious injury. Even if you’ve gotten away with it before, use a metallic engine part instead when jumping a car. (Source:he fuel system. (Source:Now start the car with the good battery, let it charge the weak battery for 5 minutes, then try to start the car with the weak battery. If it doesn’t start, shut off both ignitions, make sure the cable clamps are making good contact and then try it again. When the car with the weak battery starts, wait (about 15 seconds or so) to make sure it doesn’t stall.

Disconnect the cables in the reverse order: First remove the negative cable from the car you jumped, then the negative cable from the car with the good battery. Then remove the positive cable from the car with the good battery (don’t touch a grounded part of either car with the clamp of the positive cable). Finally, remove the positive cable from the car with the weak battery. Remember, both engines will be running (with any luck!), so work carefully as you remove cables to avoid belts, fans and other moving parts. Once you're in position, put your gloves and goggles on and attach the red 'positive' lead to the positive battery terminal on the working car. Look out for a '+' symbol next to the terminal. Then, connect the other end of the red lead to the positive terminal on the flat battery. (Source:www.halfords.com)

 

 

Related Articles