FutureStarr

How to jump start a car

How to jump start a car

How to jump start a car

Most will know how to jump start a car by giving the car a jolt of power. However, if your car is battery dead or near death, you might need to use a starter relay. Either way, we have the information you need to know how to start a car.A jump start is a handy way to start a car with a flat battery. But jump leads can cause damage to both cars and people if they’re not used properly.

Car

Turn off both cars’ engines and carefully disconnect the leads in the reverse order to the way they were connected (remove the black lead from your car first and finish with the red lead from the other car). If the battery's more than 5 years old and seems like it's struggling to start the car, get it checked out. It's better to be safe than sorry - it'll be worse if it's a roadside emergency or on a cold morning when you're already late for work.You don’t need many tools to jump-start a car battery. Off course you need to find a functioning car to use for the jump-start, if you have a second vehicle with you then it’s a plus. Jumper cables are the most popular tool used to jump start cars because they are inexpensive and easy to store. Jumper cables usually come in a variety of lengths, ranging from 10-20 feet.

Some people think longer cables are better so that you do not have to move a car with a dead battery. But, while longer cables provide convenience, they may lose power as the longer the cable, the farther the energy has to travel. The gauge of the cable denotes the strength of the cables. The lower the gauge, the thicker the cables and the stronger they are. Gauge six is generally recommended as standard size for jumper cables.Open the hood to both cars, and locate the batteries and battery terminals. Usually, the two terminals on each battery will be covered in red or black, with a + or – sign on top. Look at the batteries and make sure that you can identify which is positive, and which is negative. This distinction is crucial to the success of your jump. If the battery terminals are dirty, wipe them off with a rag or wire brush. (Source: carspiritpk.com)

Start

AAA service technicians are trained on battery technology and vehicle types. Plus they can access an online database for the appropriate procedure based on the make, model, and engine. In cases where they can’t start the old battery, some carry replace“When a vehicle battery dies, the most common solution is to jump-start the battery using jumper cables and another vehicle. However, if proper steps are not taken, there is no guarantee this method won’t cause damage to the vehicle,” says David Bennett, AAA’s manager for repair systems. “For example, attempting to jump-start a damaged or frozen battery could cause significant damage to the vehicle and worse, individuals around the vehicle.”

While jumping a dead battery is super simple, you’d be surprised by the number of men who have no idea how to do it. And even if you have learned how to jump start a car before, it can be easy to forget what cables go where. Positive on negative? Ground the positive cable on the car with the good battery? Red caTo avoid being stranded, you should be diligent about servicing and replacing your car’s battery, Banta says. He recommends having the battery load tested annually after it’s 2 years old if you live in a warmer climate and 4 if you live in a colder climate. Doing so tests its ability to hold voltage while being used, and the results will let you know when it’s time to start shopping for a replacement.(Source:www.consumerreports.org)

 

Related Articles