FutureStarr

Butterfly Weed Seed Germination

Butterfly Weed Seed Germination

Butterfly Weed Seed Germination

To start seeds indoors, fill a flat with a commercial germination medium (such as Jiffy Mix). Moisten the medium. Scatter the seeds over the surface of the germination medium and lightly press the seeds into the material. Cover the seeds with an additional 1/4 inch of the germination mix. Carefully moisten the additional material. Slide the flat in a plastic bag and place the bagged flat in the refrigerator. Leave the flat in the refrigerator for 4 to 6 weeks. After 4 to 6 weeks, remove the flat from the refrigerator and place it in an area with a temperature of 70 to 75 degrees Fahrenheit. Seeds should begin to germinate in 3 to 4 weeks. (If no seedlings appear after 4 weeks, place the flat back in the refrigerator for another 4 to 6 weeks and repeat the process.) Take the flat out of the plastic bag as soon as seedlings appear and place the flat under fluorescent lights in a 60 to 65 degree Fahrenheit location. Transplant the seedlings into individual pots when the seedlings are 1 to 2 inches tall. Continue to grow the seedlings indoors under fluorescent lights for several more weeks. Prior to planting outdoors, place the seedlings outdoors in a shady, protected location and then gradually expose the seedlings to longer periods of direct sun. Plant the seedlings in their permanent locations after they have hardened outdoors for 10 to 14 days.

Seed

Germination: To start Milkweed seed we recommend starting inside, but before this happens Milkweed seeds need to go through a cold stratification period. Cold stratification is very important for the germination and growth of Milkweed. It helps break the seeds natural dormancy cycle. To do this, we recommend placing Milkweed seed in a damp paper towel or damp sand in a zip lock bag and place in your fridge for 3 – 6 weeks (30 days). Place in an area of the fridge, where it won’t get damaged. We taped ours to the bottom of a refrigerator shelPlanting In Spring: Once the 30 days are complete, it’s time to plant the cold stratified Milkweed (asclepias) seeds. We recommend planting in 2-4” peat pots. Fill peat pots ¾ of the way with seed starting potting soil and gently add water. Water should be able to drain through the peat pots. Once the soil is damp, place 1-2 cold stratified seeds into each pot. To finish, place 1/4 inch of soil on top of the seed.

Planting In Fall: If you're planting Milkweed seed in the fall, let nature do the cold stratification for you! There is no need to place your seeds in the refrigerator before planting, you can plant seeds directly into the soil after there have been a few frosts in your area. This allows for the seeds to remain dormant for the winter and come up in the early spring. Clear away any existing growth and using your index finger to measure, create 1.5" holes for each Milkweed seed. We recommend spacing seeds about 4-6” apart. Place a seed in each hole and cover. Water thoroughly.Light Requirements: For the next few weeks, make sure the Milkweed is either in a sunny window, in a green house or under a grow light. Milkweed needs lots of sun and warmth to grow. If you’re using a grow light, make sure to lower the bulb closer to the pots or your seedlings may become leggy, as they stretch to the light. In our experiment, this happened to us. Ideally a sturdier stem is better. Cold stratified seeds should germinate and sprout within 10-15 days once planted. In total Milkweed from the day they are cold stratified to growth can take 40 plus days, so be patient! (Source: www.americanmeadows.com)

 

 

Related Articles